Material:

• UV-stable, alkali-proof PVC, fibre glass reinforcement mesh Vertex R 117 ETAG 004, double self-adhesive expansion PE tape with closed pores.

Advantages-application:

• Creates expansion jointing between the contact insulation system and the window or door frame
• Prevents the final coating from flaking off the window or door frame
• Protects window or door frames and panels against mechanical damage or getting dirty during the application of building adhesive or rendering
• Prevents hairline cracking
• Prevents penetration of cold and noise
• No additional sealing of joints is required
• Suitable for narrower window or door frames
• A part of the profile is not hidden, its front side is visible
• Creates an aesthetically perfect finish

Installation tips:

• First remove the protective foil from the frame and clean it from residual adhesive and grease
• Using special shears for cutting profiles, shorten the profile to the required length, remove the covering foil from the foam expansion tape and stick on the frame closely to the insulating material
• Always stick the trimming window profiles 6 mm, 9 mm and TOP to the window or door frame after applying the insulating material on the jamb
• Then apply building adhesive on the stuck insulating material and press the profile reinforcement mesh in it
• Wipe off the adhesive that has been pressed out over the mesh and level with a metal float
• Coat the whole profile mesh gradually into the building adhesive
• The inner corners of jambs must be reinforced by inserting a reinforcement mesh strip corresponding to the jamb width
• It is useful to shape the mesh to the right angle in advance