Features:
Creation of joints elastic in 2 directions between thermal insulating system and window or door frame
Prevents plaster detachment from the window or door frame
Protects window and door frames and panes against mechanical damage or soiling in the course of mortar or plaster application
Prevents hair cracks
Prevents cold penetration
Eliminates the need for additional joint filling
The protective lamella of softened PVC will protect the bead from impurity settlement
The adhesive foam tape improves the longevity of the joint
Aesthetically perfect detail
Instruction for use:
First remove the protective foil from the window frame and clean potential impurities or grease. Trim the bead with special mitre cutter to the required length, remove the cover foil from the foam tape and glue to the frame. Take into account that the adhesive achieves full adhesion only after 24 hours. The bead may be glued onto the window or door frame before or after insulation application on the door or window reveal. Connect the beads in the window corners at 45°. After removal of the cover tape, cover the breakoff strip with protective foil. The foil will protect the window or door from damage throughout plastering. Then apply the plaster on the insulating layer and press the mesh of the bead into it. Remove and level the excess plaster outside the mesh with a trowel. After finishing coat application, remove the snap-off strip of the bead and remove it including the window protective foil
Conditions of use:
It is forbidden to install the beads at air temperature and surface temperature below +5°C and above +30°C. It is necessary to protect the bead from direct sunlight and direct weather effects during the whole process until the plasters have dried. The bead can only be used on smooth surfaces without any surface texture or strong hydrophobic treatment
Packaging, storage and transport:
Packed in paper boxes (30 pcs.). Store and transport in horizontal position in a dry roofed place at +5°C ~ +30°C
SKU: | ALB-EW-2D-09-26 |
EAN: | 4751023403694 |
Brand: | Albau |
Movement ability: | 2D |
Material: | PVC |
Rendering system thickness: | 9mm |
Length: | 2600mm |
Mesh width: | 100mm |
Color: | White |
Amount of products in transport packaging: | 30 (78 m) |
Window reveal bead with a protective lip and glass fibre mesh. Provides connection elastic in 2 directions between the thermal insulation system and the window or door frame
The bead may be glued onto the window or door frame before or after insulation application on the door or window reveal
Material:
PVC – UV and alkali resistant
Glass fibre mesh complying with ETAG 004
Double-sided self-adhesive PE foam tape
We take responsibility for the solutions we offer because we know they work. We will be happy to provide online or on-site advice, and our customers can be sure that the products will be compliant. Our systems have been tested by independent laboratories and by experienced professionals.