Instruction for use:
Place the corner bead with glass fibre mesh into pre-applied mortar on the insulation layer. Place the bead onto the insulation layer corner, press into the mortar and level with spirit level. Then press the bead side mesh into the plaster. Remove and level the excess mortar outside the mesh with a trowel. Cover the whole bead with mesh with mortar.
It is forbidden to mount the beads at air temperature and surface temperature below +5°C and above +30°C. It is necessary to protect the bead from direct sunlight and direct weather influences during the whole installation process until the final layer has dried
Packaging, storage and transport:
Packed in paper boxes. Store and transport in a dry roofed place at +5°C ~ +30°C, in the horizontal position to prevent the profiles from sagging
| SKU: | ALB-EC-100/150-25 |
| EAN: | 4751023400129 |
| Brand: | Albau |
| Material: | PVC |
| Length: | 2500 mm |
| Arm width: | 22 mm x 22 mm |
| Arm thickness: | 1,1 mm |
| Angle: | 88° |
| Amount of products in transport packaging (ALB-EC-100/150-25): | 50 (125m) |
| Amount of products in transport packaging (ALB-EC-100/300-25): | 25 (62,50m) |
Corner profile with glass fibre mesh for reinforcement and protection of all corner, edge and window and door opening edges in thermal insulating system – ETICS
Material:
Features:
We take responsibility for the solutions we offer because we know they work. We will be happy to provide online or on-site advice, and our customers can be sure that the products will be compliant. Our systems have been tested by independent laboratories and by experienced professionals.
