PJ 12F / PLASTERBOARD EDGING PROFILE WITH DILATATION TAPE

Installation:

• For a firm connection, the base has to be dry, even, free of adhered pollution, dust, and grease
• The shortened profile must be carefully laid on the edge of the plasterboard board
• Unpeel and fold back about 3 cm of the backing paper from the tape
• Attach the plasterboard board with the profile to the target position of the frame (windows, doors)
• Gradually remove the remaining backing paper from the tape and press the plasterboard board with attached profile against the frame so that the tape bonds over the entire surface
• Then perform mechanical anchoring of the plasterboard board for the lining of the opening
• To shorten the profile use scissors designed for work with plastic profiles
• Application temperature (the temperature of the window frame, window molding, and surrounding) must not be lower than 5°C
• At low temperatures and strong winds, there must be counted with a lower starting graininess and a longer time for the reaction of the adhesive